Oatey 39130 1/2″ FIP ICE MAKER BOX, Brass

Oatey 39130 - Oatey 39130 1/2" FIP ICE MAKER BOX, Brass - Nails preloaded. Right or left hand installation. Valves comply with requirements of NSF 61, Section 9. Box dimensions: 3. 20" w. Patent No. Provides quick, safe water supply and shut-off for refrigerator ice maker and water dispenser. 12k ice maker box with nails preloaded. 12k ice maker box with nails preloaded. Canadian patent No.

No support needed. X 4. 15" h. D428. 117. 90133. Right or left hand installation. X 5. 89" h. X. 50" d. Manufactured to include no more than 025% weighted average lead content on wetted surfaces. X 2. 35" d. Faceplate dimensions: 5. 00" w.

More information about Oatey 39130

Oatey 38530 2-Inch Copper Sweat Standard Pack 1/4 Turn Brass Valves

Oatey 38530 - Can be used in commercial or residential applications which require supply valves and waste drain recessed into the wall. 1/4 turn brass ball valves copper sweat 2" drain opening fits pvc or abs schedule 40 dwv pipe easy to remove knockout, patent pending hammer valves Snap-on faceplate frame accommodates up to 1" drywall Box made of high impact polystyrene Top or bottom valve mount 4 support brackets included for mounting Box Dimensions: 8-3/4" W x 7-1/2" H x 3-5/8" D Faceplate Dimensions: 11-3/4" W x 10-1/8" H.

Oatey 38530 2-Inch Copper Sweat Standard Pack 1/4 Turn Brass Valves - Box dimensions: 8-3/4w x 7-1/2h x 3-5/8d inches. Drain opening fits PVC or abs schedule 40 dwv pipe. Single lever valve mounting hub locks into position in seconds. Unique, easily installed and removed test cap that does not fall into drain. Box made of high impact polystyrene. This 1/4 turn brass ball valves copper sweat features 1/4 turn brass ball valves copper sweat.

4 support brackets included for mounting. Snap-on faceplate frame accommodates up to 1" drywall. 2" drain opening fits pVC or ABS schedule 40 DWV pipe. Patented, left, versatile design allows for right, or center drain and bottom or top mount valves.

More information about Oatey 38530


Similar products:


Sioux Chief 696-1021GF Ox Box Gas Outlet Box, 1/2" NPT

Sioux Chief - Box made of high impact Polystyrene. Patented, versatile design allows for right, left, or center drain and bottom or top mount valves. Lock and load valve mounting system for quick and easy positioning. Single lever valve mounting hub locks into position in seconds. Sioux chief ox box gas outlet Box provides a profesionally looking and cost effective solution for any gas appliance installation needs.

Sioux Chief 696-1021GF Ox Box Gas Outlet Box, 1/2" NPT - Features -turn 1/2" npt ball valve for easy, secure, accessible operation high-impact ABS body for strong and durable installation gas valve is CSA certified to ANSI Z21. 15-1997 / cga 9. 1-m97 drain opening fits PVC or abs schedule 40 dwv pipe. Snap-on faceplate Frame accommodates up to 1 inch drywall. Valve has csa certification to ansi z21.

15-1997 / cga 9. 1-m97. Easy to remove knockout, patent pending hammer valves. Box dimensions: 8-3/4w x 7-1/2h x 3-5/8d inches. Turn ball valve for easy, secure, accessible operation. Connection Type: Threaded.

More information about Sioux Chief


Similar products:


Eastman 60248 Washing Machine Outlet Box with Center Drain 1/2" Sweat Connection, White

Eastman 60248 - Turn ball valve for easy, secure, accessible operation. A center drain can be installed through a pre-punched area with a 2-inch diameter. Snap-on faceplate Frame accommodates up to 1 inch drywall. The washing machine outlet box comes with a pre-installed support bracket, a faceplate cover and 1/4-turn hot and cold ball valves for shut-off during maintenance.

Easy to remove knockout, patent pending hammer valves. Faceplate dimensions: 11-3/4W x 10-1/8H inches. Box is available for ½" or ¾" iron-pipe applications or ½" CSST applications in both standard and fire-rated products. The valves have a 1/2-inch Sweat inlet connection and a 3/4-inch male hose thread outlet.

Eastman 60248 Washing Machine Outlet Box with Center Drain 1/2" Sweat Connection, White - Valve has csa certification to ansi z21. 15-1997 / cga 9. 1-m97. Drain opening fits PVC or abs schedule 40 dwv pipe. Drain: centered through a pre-punched location with 2-inch OD. It has a recessed design for residential applications to accommodate 1-inch drywall with a snap-on frame. Usage: it is designed for recessed residential applications.

This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks.

More information about Eastman 60248


Similar products:


Eastman 60245 Washing Machine Outlet Box with Double Drain, 1/2-inch Crimp PEX

EZ-FLO 60245 - It has a recessed design for residential applications to accommodate 1-inch drywall with a snap-on frame. Connection: 1/2" crimp peX inlet connection x 3/4" male hose thread outlet. Quality: eastman outlet boxes provide a safe water supply installation to protect your home from potential leaks. Unique, easily installed and removed test cap that does not fall into drain.

A right side or left side drain can be installed through two pre-punched areas with a diameter of 2-inch and a 4-inch space between each drain outlet. Single lever valve mounting hub locks into position in seconds. Connection: 1/2-inch sweat x 3/4-inch MHT connections. Box made of high impact Polystyrene. Connection Type: Threaded.

Eastman 60245 Washing Machine Outlet Box with Double Drain, 1/2-inch Crimp PEX - Contents: includes pre-installed 1/4-turn hot and cold ball valves, support bracket, and a Snap-On face-plate cover which accommodates up to 1-inch drywall. Box dimensions: 8-3/4w x 7-1/2h x 3-5/8d inches. This outlet box can be installed inverted for top mount valves. Valve has csa certification to ansi z21.

15-1997 / cga 9. 1-m97.

More information about EZ-FLO 60245


Similar products:


Sioux Chief 696-1031GF Ox Box Gas Outlet Box 3/4" NPT

Sioux Chief - Drain opening fits PVC or abs schedule 40 dwv pipe. Frame extension 696-ex: extends box face for installations thicker than 1/2" drywall. Sioux chief ox box gas outlet Box provides a profesionally looking and cost effective solution for any gas appliance installation needs. Connection: 1/2" crimp peX inlet connection x 3/4" male hose thread outlet.

Valve has csa certification to ansi z21. 15-1997 / cga 9. 1-m97. Usage: this outlet box is designed for residential applications. Easy to remove knockout, patent pending hammer valves. Patented, versatile design allows for right, left, or center drain and bottom or top mount valves. Lock and load valve mounting system for quick and easy positioning.

Sioux Chief 696-1031GF Ox Box Gas Outlet Box 3/4" NPT - Unique, easily installed and removed test cap that does not fall into drain. Turn ball valve for easy, secure, accessible operation. This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks. Box dimensions: 8-3/4w x 7-1/2h x 3-5/8d inches. Recessed box is made of high-impact ABS providing the strongest finished installation for all gas appliance needs.

Contents: includes pre-installed 1/4-turn hot and cold ball valves, support bracket, and a Snap-On face-plate cover which accommodates up to 1-inch drywall.

More information about Sioux Chief


Similar products:


Oatey 38529 Quadtro Washing Machine Outlet Box Copper Sweat Tail Piece, 1/4" Turn, 2" Hub

Standard Plumbing Supply 38529 - Connection: 1/2-inch sweat x 3/4-inch MHT connections. Box dimensions: 8-3/4"w x 7-1/2"H x 3-5/8"D. Usage: it is designed for recessed residential applications. 40 dwv pipe. Recessed box is made of high-impact ABS providing the strongest finished installation for all gas appliance needs. Drain opening fits PVC or abs schedule 40 dwv pipe.

Faceplate dimensions: 11-3/4"W x 10-1/8"H. Easy installation - "lock & load" valve mounting system for quick and easy positioning. Connection Type: Threaded. Usage: this outlet box is designed for residential applications. Unique, easily installed and removed test cap that does not fall into drain. Snap-on faceplate Frame accommodates up to 1 inch drywall.

Oatey 38529 Quadtro Washing Machine Outlet Box Copper Sweat Tail Piece, 1/4" Turn, 2" Hub - Box made of high impact Polystyrene. Features: includes a pre-installed support bracket, 1 1/4-turn hot shut-off ball valve, faceplate cover, 1 1/4-turn cold shut-off ball valve. Drain design: recessed to accommodate 1 inch dryall; Double, with left and right choice through 2 pre-punched locations; 2 inch OD; 4-inch separation between drains.

Drain: centered through a pre-punched location with 2-inch OD. Made ofhigh impact polystyrene and supplied with four mounting brackets, the Quadtro boxes provide maximum durability and performance forresidential applications. Box dimensions: 8-3/4w x 7-1/2h x 3-5/8d inches.

More information about Standard Plumbing Supply 38529


Similar products:


1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. 72-Inch Length - Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel

Fluidmaster, Inc. 12IM72 - A 1/4-inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Faceplate dimensions: 11-3/4W x 10-1/8H inches. Box is available for ½" or ¾" iron-pipe applications or ½" CSST applications in both standard and fire-rated products. This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks.

Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. Lead Free. Snap-on faceplate Frame accommodates up to 1 inch drywall. Flexibility - allows for right, left, or center drain and bottom or top mount valves. Connection: 1/2-inch sweat x 3/4-inch MHT connections.

1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. 72-Inch Length - Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel - . Drain opening fits PVC or abs schedule 40 dwv pipe. Features: includes a pre-installed support bracket, 1 1/4-turn hot shut-off ball valve, faceplate cover, 1 1/4-turn cold shut-off ball valve. Drain design: recessed to accommodate 1 inch dryall; Double, with left and right choice through 2 pre-punched locations; 2 inch OD; 4-inch separation between drains.

Meets all code requirements. Single lever valve mounting hub locks into position in seconds.

More information about Fluidmaster, Inc. 12IM72


Similar products:


Hydro Master Washing Machine Outlet Box, Washing Stop Valves with Water Hammer Arrestor

Boro - Comp x ¼ comp female Compression Thread Connection. 2" drain opening fits PVC or ABS Sch. Flexibility - allows for right, left, or center drain and bottom or top mount valves. 72" in length. Turn ball valve for easy, secure, accessible operation. Includes 1/4-turn hot and cold ball valves with water hammer arresters installed, support bracket, and a Snap-On faceplate cover.

Drain: centered through a pre-punched location with 2-inch OD. Usage: this outlet box is designed for residential applications. Faceplate dimensions: 11-3/4"W x 10-1/8"H. Easy installation - "lock & load" valve mounting system for quick and easy positioning. Replaces old copper or vinyl connectors. This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks.

Hydro Master Washing Machine Outlet Box, Washing Stop Valves with Water Hammer Arrestor - Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability. Center Drain Connection. Lead Free. Quality: eastman outlet boxes provide a safe water supply installation to protect your home from potential leaks. Features: includes a pre-installed support bracket, 1 1/4-turn hot shut-off ball valve, faceplate cover, 1 1/4-turn cold shut-off ball valve.

More information about Boro


Similar products:


10-Pack PROCURU 1/2-Inch CTS Escutcheon Flange Plate Pipe Cover, Chrome-Plated Steel with SureGrip, for 1/2" Copper Pipe

PROCURU - Includes 1/4-turn hot and cold ball valves with water hammer arresters installed, support bracket, and a Snap-On faceplate cover. Valve has csa certification to ansi z21. 15-1997 / cga 9. 1-m97. For concealing gaps around water supply pipe. Features: includes a pre-installed support bracket, faceplate cover, 1 1/4-turn hot shut-off ball valve, 1 1/4-turn cold shut-off ball valve.

Drain design: recessed to accommodate 1 inch dryall; Double, with left and right choice through 2 pre-punched locations; 2 inch OD; 4-inch separation between drains. Easy Install. Easy to remove knockout, Patent Pending Hammer Valves. Single lever valve mounting hub locks into position in seconds. Faceplate dimensions: 11-3/4W x 10-1/8H inches.

10-Pack PROCURU 1/2-Inch CTS Escutcheon Flange Plate Pipe Cover, Chrome-Plated Steel with SureGrip, for 1/2" Copper Pipe - Box is available for ½" or ¾" iron-pipe applications or ½" CSST applications in both standard and fire-rated products. Quality: eastman outlet boxes provide a safe water supply installation to protect your home from potential leaks. Each pack contains 10 pcs. This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks.

Connection: 1/2-inch sweat x 3/4-inch MHT connections. Turn ball valve for easy, secure, accessible operation.

More information about PROCURU


Similar products:


Pack of 10pcs of 1/4 Turn Angle Stop Valve 3/8" OD X 1/2" PEX Brass 129-06S - Lead Free

JQ Valves - Chrome-plated steel construction. Braided stainless steel construction won't kink or crease. Easy to install. This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks. Features: includes a pre-installed support bracket, 1 1/4-turn hot shut-off ball valve, faceplate cover, 1 1/4-turn cold shut-off ball valve.

Drain design: recessed to accommodate 1 inch dryall; Double, with left and right choice through 2 pre-punched locations; 2 inch OD; 4-inch separation between drains. Lead Free. Frame extension 696-ex: extends box face for installations thicker than 1/2" drywall. Usage: this outlet box is designed for residential applications.

Pack of 10pcs of 1/4 Turn Angle Stop Valve 3/8" OD X 1/2" PEX Brass 129-06S - Lead Free - 1/2-inch npsm inlet connection and 3/4-inch Male Hose Thread MHT outlet. Box dimensions: 8-3/4"w x 7-1/2"H x 3-5/8"D. Easy to remove knockout, patent pending hammer valves. Stop valve lead free. Single lever valve mounting hub locks into position in seconds. Snap-on faceplate Frame accommodates up to 1" drywall.

Durability - Box and support brackets made from high-impact polystyrene. Flexibility - allows for right, left, or center drain and bottom or top mount valves.

More information about JQ Valves


Similar products: